Inspection System for Filter Positioning
Industry: Semiconductors / Electronics
Brands: Cognex Insight Camera
Case Number: TH-0018
Solution: Vision Inspection
Customer has a problem on filter positioning not installed properly. So, they need to inspect the gap between filter and media. Gap > 100mm is good part and gap < 100mm will be rejected.
Cognex 7000 Series Vision System is used to address the issue.
With our Vision Inspection System, it can reduce the cost of 2 operators and also do 100% real-time inspection without error.
Also increase productivity around 10 times, inspection time reduced from 10 seconds to 1 second.